Strict Standards: Non-static method cls_image::gd_version() should not be called statically in /home/sandal0/public_html/includes/lib_base.php on line 346
PiJuice HAT樹莓派行動電源_擴充_Raspberry Pi樹莓派專業店-跂礄旗艦店 - Powered by ECShop
當前位置: 首頁 > 擴充 > PiJuice HAT樹莓派行動電源


PiJuice HAT樹莓派行動電源

PiJuice HAT樹莓派行動電源

prev next

  • 商品貨號:SA001114
    商品庫存: 14
  • 商品點擊數:360
  • 本店售價:NTD2700元
    用戶評價: comment rank 5
  • 商品總價:
  • 購買數量:



PiJuice HAT樹莓派行動電源-A Portable Power Platform For Every Raspberry Pi
















Onboard 1820 mAh “off the shelf” Lipo / LiIon battery for ~4 to 6 hours in constant use! (with support for larger Lipo Battery of 5000 or 10,000 mAH+ to last up to 24 hrs +)

A Full Uninterrupted / Uninterruptable Power Supply solution.

Designed for the Raspberry Pi A+, B+, 2B, 3B and 3B+ but also compatible with Raspberry Pi Zero v1.3 and Raspberry Pi Zero Wireless.

Integrated Real Time Clock

Onboard intelligent on/off switch

Low power deep-sleep state with wake on interrupt/calendar event

Programmable multi-colored RGB led (x2) and buttons (x3) with super simple user-configurable options

Hardware watchdog timer to keep your Raspberry Pi on and working in mission-critical remote applications

Our revolutionary PiAnywhere technology – the best way to take your Pi off the grid!

Full power management API available to Raspberry Pi OS with auto shutdown capability when running low on batteries

Raspberry Pi HAT compatible layout, with onboard EEPROM for easy plug and play operation

Low profile design to fit inside lots of existing Raspberry Pi cases!

Enhanced graphical user interface (GUI) available for easy install (via APT)

Customisable scripts for enhanced flexibility and full report of battery status

All GPIOs available via stackable header for ease of expandability and connectivity

Charge via on-board micro USB or via the Raspberry Pi micro USB (or from onboard pin headers)

Batteries can be charged from different type of sources and voltages

Replace the battery without downtime. Compatible with any single cell LiPo or LiIon battery

Fully CE and FCC tested design. Battery safety tested also.


Technical Information

The EEPROM can be disabled and its I2C address changed for increased compatibility with other boards

BP7X battery - original battery from Motorola Droid 2 (A955) - 1820mAh battery

Microcontroller is an ST Micro STM32F030CCT6 ARM Cortex-M0, 48MHz, F64KB, R8KB, I2C, SPI, USART, 2.4-3.6V

Charge IC - BQ24160RGET Charger IC Lithium-Ion/Polymer, 2.5A, 4.2-10V

Fuel gauge IC - LC709203FQH-01TWG Battery Fuel Gauge, 1-Cell Li-ion, 2.8%


Optional spring pin - Mil-Max 0929-7-15-20-77-14-11-0

Compatible with any 4 pin battery on board that can be used with 00-9155-004-742-006 battery contacts from AVX including the BP7X, BP6X, and any compatible batteries including the 1600mAh and 2300mAh ones from CameronSino (CS-MOA853SL and CS-MOA855XL)

There is an on board 4 pin screw terminal block for larger off board batteries. Any single cell LiPo / LiIon is compatible. However, you use your own sourced battery at your own risk. We HIGHLY RECOMMEND using a battery with an internal protection circuit and a NTC (temp sensor)

Optional header for offboard button - connected to same output as SW1

6 pin breakout header - with two GPIO from the ARM Cortex-M0, Vsys, 5v0, 3v3, GND connections

Header for optional off board solar panel / wind turbine etc.

Optional RF Shield attachment - Harwin S02-20150300 (can also double as an inexpensive heatsink)

Input voltage range - 4.2V – 10V

Output voltage - 3.3V and 5V

Output amperage - maximum current at 5V gpio is 2.5A and at VSYS output 2.1A, but also this depends heavily on battery capacity. For BP7X have measured around 1.1A at 5V GPIO and around 1.6A at VSYS output. Obviously, this also depends heavily on the current draw demanded by the Raspberry Pi/device itself. To achieve a maximum of 2.5A it will need battery over 3500mAh.






1 x PiJuice HAT

1 x Battery and battery surround

1 x PiJuice guide

4 x Mounting posts attached to PiJuice

8 x Mounting screws (4 are already assembled to the board)

1 x Pogo pin

3 x Stickers

Boxed weight - 96g

Boxed dimensions - 12.2 x 10.8 x 3.5 cm

Unboxed weight - 57g

Unboxed dimensions - 6.5 x 5.6 x 2 cm




  • 暫時還沒有任何用戶評論
總計 0 個記錄,共 1 頁。 第一頁 上一頁 下一頁 最末頁
用戶名: 匿名用戶
驗證碼: captcha