歡迎光臨本店请登录  |  免费注册
當前位置: 首頁 > 鏡頭 > Arducam 1MP*4 Quadrascopic Camera Bundle Kit for Raspberry Pi, Nvidia Jetson Nano/Xavier NX
Arducam 1MP*4 Quadrascopic Camera Bundle Kit for Raspberry Pi, Nvidia Jetson Nano/Xavier NX
Arducam 1MP*4 Quadrascopic Camera Bundle Kit for Raspberry Pi, Nvidia Jetson Nano/Xavier NX
  • 商品貨號:SA001474
  • 商品點擊數:1717
    累計銷量:10
  • 市場價格:NTD10320
    本店售價:NTD8600
    註冊用戶:NTD8600
  • 商品總價:
  • 購買數量:

商品描述:

商品屬性

Arducam 1MP*4 Quadrascopic Camera Bundle Kit for Raspberry Pi, Nvidia Jetson Nano/Xavier NX

 


 

 


 

 

貼心提醒

 


原廠進口

This bundle kit is not recommended for Raspberry Pi Zero.

https://www.arducam.com/docs/cameras-for-raspberry-pi/synchronized-stereo-camera-hat/camarry-1mp4-quadrascopic-camera/

https://www.arducam.com/docs/camera-for-jetson-nano/multiple-cameras-on-the-jetson-nano/camarray-arducam-1mp-quadrascopic-camera-bundle-kit/


  

產品特色

 

- Camarray Quadrascopic Stereo Camera HAT

  Support Raspberry Pi 3B/3B+/4B and Jetson Nano/NX

  Two/Three/Four MIPI camera inputs and one MIPI camera output

  Support 1/2 lane MIPI cameras input up-to 1Gbps/lane

  Support 2 lane MIPI output up-to 1Gbps/lane

  Support RAW8/RAW10/RAW12 output format, the output format automatically changes with the input format

  Support standard V4L2 framework, Video Nodes and Controls (Exposure, Gain and depending on camera parameters)

  Support Arducam cameras up to 12MP with proprietary camera driver with full resolution combine

  Support Two/Three/Four MIPI camera side-by-side combine, channel 0/1/2/3 software switching on the fly

  HAT Size: 65 x 56 mm

- Camera

  Sensor: Monochrome global shutter OV9281

  Pixel Size: 3 μm x 3 μm

  Active Array Size: 1280 x 800

  Optical Size: 1/4 inch

  Focusing Range: 30mm ~ infinite

  IR Sensitive: No IR filter, sensitive to IR

  Output interface: 2-lane MIPI serial output

  Video Modes: 8-bit RAW, 45fps@1280*4 × 800 with Arducam driver on Jetson Nano/Xavier NX; 30fps@1280*4 × 800 with Arducam driver on Rpi

  Board Size: 40mm x 40mm

- Lens

  Optical Format: 1/2.7”

  Distortion: <1%

  Effective Focal Length: 2.8mm

  FOV on 1/4” RPi Camera: 70° (H)

  F/NO: 2.8

  Mount: M12

  Size: 14mm x 15.6mm

  Weight: 4g

 


 

 


 

產品規格

 

4 pcs 1MP OV9281 global shutter camera module with low distortion M12 lens

1 pcs Arducam Camarray quadrascopic stereo camera HAT

4 pcs 150mm/6inch 22pin to 22pin camera cables

1 pcs 300mm/12inch 15pin to 22pin camera cable

1 pcs 73mm/2.87inch 15pin to 22pin camera cable

4 pcs M2.5*10mm Nylon Hex Standoffs

4 pcs M2.5 Nylon Nuts

4 pcs M2.5*6mm Nylon Screws

如有不同,以原廠出貨為準 

B0267  

商品標籤

購買過此商品的人還購買過

Multi camera V2 for RPi 3B/3B+

Multi c...

NTD1785
Arducam CSI-USB UVC Camera Adapter Board for 12.3MP IMX477 RPi Camera

Arducam...

NTD1390
Arducam 迷你鏡頭模組 Shield w/ 2 MP Plus OV2640 for Arduino

Arducam...

NTD1020

購買記錄(近期成交數量0)

還沒有人購買過此商品
總計 0 個記錄,共 1 頁。 第一頁 上一頁 下一頁 最末頁

用戶評論(共0條評論)

  • 暫時還沒有任何用戶評論
總計 0 個記錄,共 1 頁。 第一頁 上一頁 下一頁 最末頁
用戶名: 匿名用戶
E-mail:
評價等級:
評論內容:
驗證碼: captcha