Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit

 

 

 

 

 

 

貼心提醒

 

 

內附二組Brass M2.5 Standoffs
 

 

 

產品特色

 

4 H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC.

Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)

Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.

Big terminal block connectors to easily hook up wires (18-26AWG) and power

Polarity protected 2-pin terminal block and jumper to connect external 5-12VDC power

Works best with Raspberry Pi model A+, B+, or Pi 2, but can be used with a model A or B if you purchase a 2x13 extra-tall header and solder that instead of the 2x20

Install the easy-to-use Python library, check out the examples and you're ready to go!

 

 

 

產品規格

 

Dimensions: 65 x 56 x 13mm