Arducam 8MP Pan Tilt Zoom PTZ Camera for RPi and NVIDIA

 

 

 

 

貼心提醒

 

原廠進口

https://www.arducam.com/docs/cameras-for-raspberry-pi/native-raspberry-pi-cameras/8mp-imx219-ptz-camera-module/

https://www.arducam.com/docs/camera-for-jetson-nano/native-jetson-cameras-imx219-imx477/imx219-ptz-camera/ 

https://docs.arducam.com/Nvidia-Jetson-Camera/Nvidia-Jetson-Orin/Introduction/

This camera module supports the latest Raspberry Pi OS Bullseye (released on Jan 28th, 2022) and libcamera apps, for the previous Raspberry Pi OS (Legacy) users 

  

產品特色

 

Image Sensor Sony IMX219

Optical Size 1/4”

Active Pixels 8MP 3280(H)x2464(V)

Frame Rates 1080p47, 1640 × 1232p41 and 640 × 480p206

NVIDIA Jetson Nano/Xavier NX/Orin NX/Orin Nano/AGX Orin:

3280x2464@21fps, 3280x1848@28fps, 1920x1080@30fps, 1640x1232@30fps, 1280x720@60fps

Shutter Type Rolling Shutter

Focal Length 3.2-11.1mm±5%

F.NO W:1.6-T:3.3±5%

Focus Type Front group: focus Back group: Zoom

IR Sensitivity Optional with additional Motorized IR-Cut filter

M.O.D 0.8M

Dimension 36mm x 36mm

Pan and Tilt Range 0-180°

Zoom Range (Wide => Tele) 2317 steps 0.00396mm/step

Focus Range(Near => Far) 3009 steps 0.0047mm/step

 

  

 

產品規格

 

1 x Arducam PTZ Pan Tilt Zoom Lens, assembled with a 8MP IR-CUT switchable camera board

1 x Controller Board

1 x 15-Pin FPC Cable (11.8 in/30 cm)

1 x XH2.54 Jumper wire with 6Pin Famale Connector (11.8 in/30 cm)

B01678MP