Strict Standards: Non-static method cls_image::gd_version() should not be called statically in /home/sandal0/public_html/includes/lib_base.php on line 346
Adafruit Trinket-Mini Microcontroller-3.3V Logic_其他_Raspberry Pi樹莓派專業店-跂礄旗艦店 - Powered by ECShop
當前位置: 首頁 > 其他 > Adafruit Trinket-Mini Microcontroller-3.3V Logic


Adafruit Trinket-Mini Microcontroller-3.3V Logic

Adafruit Trinket-Mini Microcontroller-3.3V Logic

prev next

  • 商品貨號:SA000956
    商品庫存: 12
  • 商品點擊數:242
  • 本店售價:NTD360元
    用戶評價: comment rank 5
  • 商品總價:
  • 購買數量:



Adafruit Trinket-Mini Microcontroller-3.3V Logic for 樹莓派











不含麵包板、USB 線、跳線

Datasheet, EagleCAD PCB files, schematics, and Fritzing Library available in the product tutorial

Trinket does not have a Serial port connection for debugging so the serial port monitor will not be able to send/receive data

Some computers' USB v3 ports don't recognize the Trinket's bootloader. Simply use a USB v2 port or a USB hub in between





ATtiny85 on-board, 8K of flash, 512 byte of SRAM, 512 bytes of EEPROM

Internal oscillator runs at 8MHz, but can be doubled in software for 16MHz

USB bootloader with a nice LED indicator looks just like a USBtinyISP so you can program it with AVRdude (with a simple config modification) and/or the Arduino IDE (with a few simple config modifications)

Micro-USB jack for power and/or USB uploading, you can put it in a box or tape it up and use any USB cable for when you want to reprogram.

We really worked hard on the bootloader process to make it rugged and foolproof, this board wont up and die on you in the middle of a project!

~5.25K bytes available for use (2.75K taken for the bootloader)

Available in both 3V and 5V flavors

On-board 3.3V or 5.0V power regulator with 150mA output capability and ultra-low dropout. Up to 16V input, reverse-polarity protection, thermal and current-limit protection.

Power with either USB or external output (such as a battery) - it'll automatically switch over

On-board green power LED and red pin #1 LED

Reset button for entering the bootloader or restarting the program. No need to unplug/replug the board every time you want to reset or update!

5 GPIO - 2 shared with the USB interface. The 3 independent IO pins have 1 analog input and 2 PWM output as well. The 2 shared IO pins have 2 more analog inputs and one more PWM output.

Hardware I2C / SPI capability for breakout & sensor interfacing.

Works with many basic Arduino libraries including Adafruit Neopixel!

Mounting holes! Yeah!

Really really small







Dimensions: 27 x 15 x 4mm

Weight (no headers): 1.85 g




  • 暫時還沒有任何用戶評論
總計 0 個記錄,共 1 頁。 第一頁 上一頁 下一頁 最末頁
用戶名: 匿名用戶
驗證碼: captcha