MCP23008 - i2c 8 input/output port 端口擴展器

 

 

 

 

 

 

  

貼心提醒

 

原廠進口

This board/chip uses I2C 7-bit address between 0x20-0x27, selectable with jumpers

https://cdn-shop.adafruit.com/datasheets/MCP23008.pdf

 

 

產品特色

Use this chip from 2.7-5.5V (good for any 3.3V or 5V setup), and you can sink/source up to 20mA from any of the I/O pins so this will work for LEDs and such. Team it up with a high-power MOSFET if you need more juice. DIP package means it will plug into any breadboard or perfboard.

You can set the i2c address by tying the ADDR0-2 pins to power or ground, for up to 8 unique addresses. That means 8 chips can share a single i2c bus - that's 64 I/O pins!

 

 

 

  

 

產品規格