Arducam 8MP*4 IMX219 Quadrascopic Camera Bundle Kit for RPi, NVIDIA® Jetson AGX Orin/Orin Nano/Orin NX

 

 

 

 

 

貼心提醒

 

原廠進口

https://www.arducam.com/docs/cameras-for-raspberry-pi/synchronized-stereo-camera-hat/camarray-arducam-8mp-synchronized-quad-camera-bundle-kit/

https://docs.arducam.com/Nvidia-Jetson-Camera/Multi-Camera-CamArray/Camarray-Firmware/

https://docs.arducam.com/Raspberry-Pi-Camera/Multi-Camera-CamArray/quick-start/

https://docs.arducam.com/Nvidia-Jetson-Camera/Multi-Camera-CamArray/quick-start/ 

 

產品特色

 

Support Platform Raspberry Pi/Nvidia Jetson

Output/CSI-2 Speed x1 CSI-2 2-lane Output Port/1.0 Gbps/Lane

Output Format RAW8/RAW10

ISP Support Supported on Raspberry Pi

External Trigger Not Support

Aggregate mode 1/4 Spelling Combine

Frame Rate(On Raspberry Pi) 103fps@640x480,20fps@1640x1232,23fps@1920x1080,10fps@3280x2464

Frame Rate(On NVIDIA Jetson)* L4t 32.x: 8MP@10.5fps, 1080p@15, 720p@30fps

L4t 35.x:3280×2464@10.5fps,3280×1848@14fps,1920×1080@15fps,1640×1232@15fps,1280×720@30fps

Image Sensor Sony IMX219

Pixel Size 1.12 μm x 1.12 μm

Active Array Size 3280 x 2464

Optical Format 1/4”

Camera Interface 2-lane MIPI CSI-2

IR Sensitive Integral IR Cut filter, Visible Light Only

Camera Board Size 24mm x 25mm

Camarray Hat Size 65mm x 55 mm

Default Lens Mount Stock Lens

Effective Focal Length 3.04mm

FOV on 1/4” RPi Camera 62.2° (H), 48.8(V)

 

 

 

 

 

 

 

 

 

 

產品規格

4 × IMX219 Camera Module

1 × Arducam Camarray HAT

4 × 15cm 22-22pin Camera FPC Cable

1 × 30cm 15-22pin Camera FPC Cable

1 × 30cm 22-22pin Camera FPC Cable

1 × 7cm 15-22pin Camera FPC Cable

1 × Screw Pack

B0396