Arducam 12MP 477P PTZ Camera for RPi 4/3B+/3 and Jetson Nano/Xavier NX, IR-Cut Switchable Camera with Metal Base and 2 Digital Servos
貼心提醒
原廠進口
產品特色
Optical Size 1/2.3”
Pixel Size 1.55um x 1.55um
Active Pixels 12.3MP 4056(H)x3040(V)
Frame Rates
Frame Rate(Raspberry Pi): 2028 × 1080p50, 2028 × 1520p40 and 1332 × 990p120
NVIDIA Jetson Nano/Xavier NX/Orin NX/Orin Nano/AGX Orin:
L4t 32.x: 4032x3040@30fps, 3840x2160@30fps, 1920x1080@60fps
L4t 35.x: 4032x3040@20fps, 3840x2160@30fps, 1920x1080@60fps
Shutter Type Rolling Shutter
Focal Length 4.38-10.71mm±5%
F.NO W:1.6-T:3.3±5%
Focus Type Front group: focus Back group: Zoom
Field of View(FOV) 96° – 33° (Horizontal)
IR Sensitivity Optional with additional Motorized IR-Cut filter
Dimension 36mm x 36mm
Pan and Tilt Range 0-180°
Zoom Range (Wide => Tele) 2317 steps 0.00396mm/step
Focus Range(Near => Far) 3009 steps 0.0047mm/step
PTZ Base Material Full metal, aluminum alloy
Shipping Weight 480g (1.06lb)
Overall Size 12cm*12cm*13cm(L*W*H)
![]()
產品規格
1 x Arducam PTZ Lens, assembled with a 12MP IR-CUT switchable camera board and camera control board
1 x Pre-assembled Metal Base with 2 Digital Servos
1 x 15-Pin to 22-Pin Ribbon Cable (11.8 in/30 cm)
1 x 22-Pin Ribbon Cable (11.8 in/30 cm)
1 x XH2.54 Jumper wire with 6-Pin Female Connector (11.8 in/30 cm)
4 x Copper Standoffs for the Base
1 x Black Acrylic Sheet for fixing the camera module to the U-shaped bracket
B0167B12