Arducam 12MP IMX708 Quad-Camera Kit, Wide Angle Stereo Synchronized Camera Module for RPi
貼心提醒
原廠進口The four-channel camera adopts the 2×2 synthesis method. The images of cameras 0 and 1 are completely synchronized, the images of cameras 2 and 3 are completely synchronized, and the images of cameras 2/3 are one frame behind the images of cameras 0/1.
The resolution of the synthesized image remains unchanged, but the frame rate is halved. This Kit Combines four cameras into one frame, each camera with a max resolution of 2304(H)x1296(V).
If any camera fails, the composite image can still be output, with the corresponding area of the failed camera being black.
The four-channel camera is a customized model, requiring HAT to provide a clock. It cannot be removed and is directly connected to the Raspberry Pi.
The driver of the kit is mainly developed based on the Raspberry Pi official board, and there is no guarantee that the third-party board can be used (Due to the different allocation of hardware resources, it may not be compatible)
This camera kit adopts a special autofocus control method, where the autofocus of all cameras is controlled by the camera located at the RX0 interface position (which is labeled with RX0 on the MIPI-CSI interface of the Arducam CamArray HAT). By moving the camera(at the RX0 position), autofocus can be achieved for a single camera, and autofocus will also be simultaneously performed for the remaining cameras.
產品特色
IMAGE SENSOR IMX708
Still Resolution 11.9 Megapixels
Common Video Modes 1536x864@60fps , 2304x1296 @28fps, 4608x2592@7fps
Sensor Resolution 4608 x 2592 pixels
Sensor image area 6.45 x 3.63mm (7.4mm diagonal)
Pixel Size 1.4μm × 1.4μm
Optical Size 1/2.43"
IR Sensitivity Integral IR-cut Filter, visible light only
Output/CSI-2 Speed x1 CSI-2 2-lane Output Port/1.0 Gbps/Lane
Output Format RAW10
ISP Support Supported by Raspberry Pi
Aggregate mode 1/4 Spelling Combine
External Trigger Not Support
Camera Interface 2-lane MIPI CSI-2
FOCUS TYPE Autofocus
F.NO F2.2
Field of View(FOV) 120°(D)x100°(H)x72°(V)
Lens Mount Stock Lens
Focus Distance 10cm~infinity
Operating Voltage 5 V +/- 5%
Working Current Max 700mA
Camera Board Size 24×25 mm
Camarray Hat Size 65 x 55mm
產品規格
4 x IMX708 Autofocus Camera Module
1 x Arducam Camarray HAT
4 x 15cm 22pin Camera Cable
1 x 30cm 15-22pin Camera Cable
1 x 30cm 22-22pin Camera Cable
1 x 7cm 15-22pin Camera Cable
1 x Screw Pack
B0484
