Adafruit Silicon MEMS Microphone Breakout - SPW2430

 

 

 

貼心提醒

 

原廠進口

Adafruit Silicon MEMS Microphone Breakout - SPW2430

 

 

 

 

貼心提醒

 

原廠進口 

針腳焊接完成

 

 

  

產品特色

 

The SPW2430 is a small, low cost MEMS mic with a range of 100Hz - 10KHz, good for just about all general audio recording/detection

This breakout is best used for projects such as voice changers, audio recording/sampling, and audio-reactive projects that use FFT. To keep the breakout small and simple, we only added a 3V voltage regulator (the microphone requires 3.3V DC) and filter capacitors. No additional opamp is included, the output peak-to-peak voltage has a 0.67V DC bias and about 100mVpp (peak-to-peak) when talking near the microphone, which is good for attaching to something that expects 'line level' input without clipping.

connect GND to ground, Vin to 3.3-5VDC

 

 

 

 

 

產品規格

 

 

Weight: 0.9g

Product Dimensions: 15.8 x 14.1 x 2.9mm

 

 

 

針腳焊接完成

 

 

  

產品特色

 

The SPW2430 is a small, low cost MEMS mic with a range of 100Hz - 10KHz, good for just about all general audio recording/detection

This breakout is best used for projects such as voice changers, audio recording/sampling, and audio-reactive projects that use FFT. To keep the breakout small and simple, we only added a 3V voltage regulator (the microphone requires 3.3V DC) and filter capacitors. No additional opamp is included, the output peak-to-peak voltage has a 0.67V DC bias and about 100mVpp (peak-to-peak) when talking near the microphone, which is good for attaching to something that expects 'line level' input without clipping.

connect GND to ground, Vin to 3.3-5VDC

 

 

 

 

 

產品規格

 

 

Weight: 0.9g

Product Dimensions: 15.8 x 14.1 x 2.9mm